Huebsch washer (representative)Huebsch washer
Huebsch HCN080 (80 lb Galaxy) specifications
The Huebsch HCN080 (80 lb Galaxy) is a 80 lb front-load commercial washer with 200 G extraction.
Large 5 hp machine (net 1,210 lb) with an 18.5 in. door; still reaches the full 200 G on Galaxy 600 controls.
Huebsch HCN080 (80 lb Galaxy) full specifications
| Capacity | |
|---|---|
| Machine type | Front-load |
| Capacity (dry weight) | 80 lb |
| Cylinder volume | 12.375 cu ft |
| Performance | |
| Max extract force | 200 G |
| Max extract speed | 626 RPM |
| Water use per cycle | Not published |
| Dimensions & weight | |
| Width | 41.5 in |
| Depth | 48.63 in |
| Height | 56.19 in |
| Door opening | 18.5 in |
| Net weight | 1210 lb |
| Utilities & drive | |
| Motor | 5 hp |
| Water inlet | Two 3/4 in. hose connections |
| Drain outlet | 3 in. |
| Electrical | 200-240/50-60/1 or 3ph; 380-415 or 440-480/50-60/3ph (no 120 V option) |
| Controls & warranty | |
| Control system | Galaxy 600 (also available with Galaxy 400) |
| Warranty | 10-yr transferable on frame, outer tub, cylinder, shaft, seals, bearings & bearing housing (vended) |
Transcribed from Huebsch's own spec sheet. Figures can vary by voltage and mount configuration — confirm against the sheet for the exact unit you are evaluating. Max extract shown is the Galaxy 600 'Ultra-High' spin; Galaxy 400 controls top out lower.
HCN080 (80 lb Galaxy) vs other Huebsch washers
| Model | Capacity | Cylinder | Extraction | W × D × H |
|---|---|---|---|---|
| HCN020 (20 lb Galaxy) | 20 lb | 2.76 cu ft | 200 G | 26 × 30.25 × 43 in |
| Galaxy 600 Front-Load Washer (21.5 lb) | 21.5 lb | 3.42 cu ft | 440 G | 26.9 × 27.75 × 44.38 in |
| HCN030 (30 lb Galaxy) | 30 lb | 4.19 cu ft | 200 G | 29 × 34.5625 × 45 in |
| HCN040 (40 lb Galaxy) | 40 lb | 6.34 cu ft | 200 G | 30.625 × 39.75 × 47.25 in |
| HCN060 (60 lb Galaxy) | 60 lb | 9 cu ft | 200 G | 34.0625 × 42.5625 × 50 in |
| HCN080 (80 lb Galaxy) (this page) | 80 lb | 12.375 cu ft | 200 G | 41.5 × 48.625 × 56.1875 in |
| HCN100 (100 lb Galaxy) | 100 lb | 15.3125 cu ft | 165 G | 41.5 × 52.625 × 56.1875 in |
Checking a used Huebsch HCN080 (80 lb Galaxy)
- Confirm Galaxy 600 vs an older Galaxy control — networking and cycle options differ.
- Check that Water Guardian and the inverter drive are functioning on used units.
- The 10-year warranty is transferable but applies to washer-extractors — verify what is left on front-load washers (3-yr).
Note the model, serial, and cycle count on the machine, then price a re-tool with the replacement-cost calculator.
All Huebsch models
The full Huebsch brand guide, lineup, and buyer notes.
Compare washers
Filter and sort every model across all brands by capacity and spin.
Find a distributor
Distributors who sell and service Huebsch.
Evaluating a store with these machines?
Inventory every washer and dryer by model and age, then score the whole deal with the Deal Analyzer.
Specifications are transcribed from Huebsch product materials for general guidance and can vary by model revision and configuration; confirm exact figures on the manufacturer spec sheet. SudsList is not affiliated with Huebsch. The spec-sheet link points to Huebsch's own authorized document.